Nextar MP3 Player MA566 User Manual

MA566 | Digital MP3 Player  
Instruction Manual  
 
Thank You For Choosing A Nextar Product. Please Read This Manual Carefully To Get The Most Out Of Your Player  
CONTENTS  
Precautions  
System requirement  
1. Installation instruction  
1.1 Installing the driver  
1.2 Installing the battery  
2. Connecting/ downloading/ disconnecting  
2.1 Connecting a PC  
2.2 Downloading  
2.3 Removing USB device  
3. Basic operation  
3.1 Buttons and functions  
3.2 Power on/off  
3.3 Main menu setup  
4. MP3 Player Operation  
CONTENTS - continued  
4.1Playing music  
4.2 Voice mode  
4.2.1 Playing voice  
4.2.2 Record function  
4.3 FM Tuner  
4.3.1 Playing FM  
4.3.2 Recording FM  
1
 
CONTENTS - continued  
4.3.3 Setting FM  
4.4 Function Setting  
4.4.1 Setting EQ mode  
4.4.2 Setting Play mode  
4.4.3 Setting Contrast  
4.4.4 Setting Backlight  
4.4.5 Setting Power set  
4.4.6 Setting Recording  
4.4.7 Setting Language  
4.4.8 Exit  
4.5 Preview function  
4.6 About  
4.7 Folder function  
4.8 Exit  
5. A-B play mode  
6. Lock function  
7. Lyric sync  
8. USB mode  
9. FAQ  
10. Technical specifications  
2
 
Precautions  
1) Never use the player while driving or operating other vehicles. Distractions can cause traffic accidents, and the use of some portable devices is restricted in some  
locations by law.. Wherever potential risks exist, please stop using the player for safety purposes.  
2) Please insert the earphone before powering on the player. This will prevent potential damage to the earphones.  
3) Keep the player clean and away from heat sources or direct sunlight, dirt, humidity or rain.  
4) If the unit becomes dirty, please clean with soft, damp cloth. Never clean with alcohol or other cleaners.  
5) Never use the player in very dry environment to avoid damage from static.  
6) Never disconnect the player from a PC abruptly during downloading, uploading and formatting to avoid application failure.  
7) When the player is used as a removable disk, please follow the proper file download and upload procedures. Nextar cannot assume any responsibility for any file lost  
due to improper operation.  
8) Attention: Because of the way that memory is calculated by your PC operating system, and because some space on your player is used for formatting purposes, the  
amount of space indicated as available on your unit may be less than the advertised capacity of the player. This is normal. See the chart on the next page for examples.  
Attention:  
1.We have made every attempt to insure the accuracy of this manual, but we cannot be responsible for any errors or omissions.  
2. We guarantee the function of this player out of the box when purchased. We cannot guarantee against data loss or damage to the player due to misuse or incorrect  
application.  
3. The software, hardware and instruction manual are subject to change and improvement without notice.  
3
 
System Requirements  
Microsoft Windows® 98se/2000/Me/XP  
Pentium 200MHZ or above.  
USB port  
120MB hard disk space  
Mouse installed  
CD-ROM drive  
1. Installation instruction  
1.1  
Installing driver for Windows® 98SE (not required for Windows® ME or above)  
a. Connect the MP3 Player to the USB port of a PC, "Find new hardware" appears on the screen, then click "Search latest driver for this device" and insert the  
driver CD into CD-ROM, and then click "Next".  
b. Select "Look in" to direct the installation directory to the "Drivers" files in the driver CD, then click Yes.  
c. PC will install the driver for Windows® 98SE automatically.  
1. 2  
Ø
Installing battery  
Install one LR03 AAA size 1.5V alkaline or 1.2V NiMH battery properly per indicator on the player.  
Press the 4; button to power the player on and enter the MP3 standby mode.  
Connecting / downloading/removing  
Ø
2.  
2.1  
Connecting a PC as USB  
Before operation, please verify the player is powered on with one end of the USB cable came with the system inserted into PC and another end into the MP3 player.  
Downloading mp3 songs  
2.2  
You can drag and drop the files and folders onto this removable device.  
The transfer icon will appears as below.  
4
 
2.3  
Removing the USB device  
a. Double click the Safely Remove Hardware icon in taskbar:  
b. From Safely Remove Hardware screen, highlight "USB Mass Storage Device" item, and then click "Stop" button. "Stop to Hardware Device" window appears on  
the screen as shown in the picture below.  
5
 
c. Click “OK”. After the "Safe to Remove Hardware" window appears, the player can be disconnected from PC safely.  
Notice: Never unplug the USB cable when transmitting data with PC to avoid damaging the Player; after data transmitting, please do not disconnect the player from PC  
until "Device now be safely removed" appears; while using USB function, all other buttons will be nonfunctional.  
Any application lost or I/O error and power on issues caused by improper operations, please refer to FAQ.  
3. Basic operation  
3. 1 Buttons and functions  
1) Hold  
2) Menu  
3) Previous 
׀
7  
4) A-B/REC  
5) VOL-  
6) Next8  
7) Earphone jack  
8) VOL+  
9) 4;Play/Pause/Stop5  
10) Microphone  
3.2  
Power on/off  
From power off mode, press the 4; button to power the player on and enter into the MP3 standby mode; press the 4;button 3 seconds under any mode, the  
player will save the data and enter power off mode.  
6
 
MP3 standby mode  
Notice: DO NOT remove the battery from the battery compartment to power the player off, as all the data on the player may be lost!  
3.3  
Main menu setup  
From standby or playing mode, you can press the MENU button to enter the main menu.  
Push the 
׀
7or8
׀
 button to select: Play music, Voice mode, FM Tuner, Setting, Preview, About, Folder and Exit; you can press the MENU button to enter the desired  
setting.  
4.  
How to use the MP3 player  
4.1  
Playing music  
a)  
From MP3 standby mode, you can press the 4;button to play MP3 music and press the 4; button again to pause. To resume playing, please press the  
4;button the third time.  
Play  
Pause  
b)  
From play or pause mode, press and hold the 4;button 2 seconds, the player will return to the MP3 standby mode, press and hold the 4;button again, it  
will repeat step "a)".  
c)  
d)  
e)  
f)  
From MP3 standby or play mode, you can push the 
׀
7 or 8
׀
 button to select previous or next track.  
From STOP status, you can push the 
׀
7or8
׀
 button to find your desired track quickly.  
From play mode, you can keep pressing the 
׀
 7or 8 
׀
 button to fast backward or forward in this track.  
From play mode, press the V + or V-button to adjust volume.  
7
 
g)  
From MP3 standby, play and pause mode, press and hold the 4; button 3 seconds, the player will save the data and enter the power off mode.  
4.2  
4.2.1 Playing voice files  
a) From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu. To enter the playing voice mode, please push the 
׀
7 or 8
׀
 
Setting the voice mode  
button to select Voice and press the MENU button. You can press the 4; button to play, and press this button again to pause. To resume playing, please press  
this button a third time.  
Play  
pause  
b) From voice standby or play mode, you can press the 
׀
7 or 8
׀
 button to select previous or next track.  
c) From STOP status, you can push and hold the 
׀
7 or 8
׀
 button to find your desired music quickly.  
d) From Play mode, you can push and hold 
׀
7 or 8
׀
 button to fast backward or forward in this track.  
e) From play mode, press the V + or V-button to adjust volume.  
f) From voice standby mode, keep pressing the 4; button over 3 seconds, the player will enter the power off mode.  
Note: The EQ selection will be unavailable when playing voice files.  
4.2.2 Recording  
From MP3 mode or voice standby mode, press the A-B/REC button 2 seconds, the player will enter the recording mode, and press the A-B/REC button again to  
stop. You can press the 4; button to play voice, and press this button again to pause. To resume playing, please press this button a third time.  
Recording  
Stop recording  
8
 
4.3  
4.3.1 Playing FM  
a) From MP3 playing, voice playing or standby mode, you can press the MENU button to enter the main menu, and then push the 
׀
7 or 8
׀
 button to select FM  
FM Tuner  
mode and press the MENU button to enter. The player will play FM under the preset station.  
b) From FM playing mode, you can switch between saved channels by pressing the 
׀
7 or 8
׀
 button when the Preset appears after pressing the 4;button.  
c) From FM playing mode, you can push the 
׀
7 or 8
׀
 button to adjust the frequency manually, the frequency will increase or decrease by 0.1MHZ; When reach the  
desired channel, you can press the MENU button to enter the FM main menu, and push the 
׀
7 or 8
׀
 button to select saving radio station, and then press the  
MENU button enter and the 4; button to save.  
d) From FM playing mode, you can press the VOL+ or VOL- button to adjust the volume.  
e) From FM playing mode, press the 4; button 3 seconds, the player will enter the power off mode.  
4.3.2 Recording FM  
From FM playing mode, press the REC /A-B button 2 seconds to enter the FM recording mode, the FM music will be recorded in WAV format. You can press the  
4; button to pause recording. You can press the REC /A-B button to finish recording and save the file and listen under the Voice mode. The player will return to  
the FM Tuner screen.  
FM recording  
pause  
9
 
4.3.3 Setting FM stations  
From FM playing mode, you can press the MENU to enter the function setting mode. You can push the 
׀
 7or 8
׀
 button to select: Play music, Play voice, Save  
station, Delete station, Auto Scan, Exit and then press the MENU button to enter the desired mode.  
A. Pay music: Press the MENU button to enter the FM main menu, and push the 
׀
7 or 8
׀
 button to select return to music playing, and then press the MENU button  
to exit the FM mode and enter the music playing standby mode.  
B. Play voice: Press the MENU button to enter the FM main menu, and push the 
׀
7or8
׀
 button to select return to voice playing, and then press the MENU button  
to exit the FM mode and enter the voice playing standby mode.  
C. Save station: Press the MENU button to enter the FM main menu, and then push the 
׀
7 or 8
׀
 button to select Save. Press the 4; button to confirm saving.  
D. Delete station: Press the MENU button to enter FM main menu, and push the 
׀
7 or 8
׀
 button to select Delete, and then press the 4; button to confirm delete.  
E. Auto Scan: After entering this mode, the player will scan the radio station automatically and save  
F. Exit: Return to FM playing mode.  
10  
 
4. 4  
Function settings  
From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the 
׀
7 or 8
׀
 button to select setting and press the  
MENU button to enter. The function setting includes: Equalizer, play mode, contrast, backlight, power set, record set, language and exit. You can press the MENU  
button to save the selected setting mode.  
4.4.1 Setting equalizer mode  
Push the 
׀
7or 8
׀
 button to select the equalizer mode: Normal, pop rock classical, jazz and bass. Press MENU button to save the selected equalizer set.  
4.4.2 Setting play mode  
Push the 
׀
7 or 8
׀
 button to select the playing mode, including: Normal, repeat one, repeat all and shuffle repeat. You can press the MENU button to save the  
selected play mode.  
4.4.3 Setting contrast  
Push the 
׀
7 or 8
׀
 button to adjust the contrast of LCD. Press MENU button to save the selected setting.  
11  
 
4.4.4 Adjusting backlight  
Push the 
׀
7 or 8
׀
 button to select the backlight setting, including: Always off, 5sec, 10sec, always on. Press MENU button to save the selected setting.  
4.4.5 Setting power set  
Push 
׀
7 or 8 
׀
 button to select the Power set, including: Disable, 2min, 10min, 30min. Press the MENU button to save the selected shutdown time.  
4.4.6 Setting rRecording  
Push 
׀
7 or 8
׀
 button to select the record set, including: 8000Hz, 11000Hz, 16000Hz, 22000Hz. Press the MENU button to save the select the recording setting.  
4.4.7 Setting language  
Push the 
׀
7 or 8
׀
 button to select language: German, English, French, Spanish, Italian, Press the MENU button to save the selected language.  
4.4.8 Exit  
Return to the previous mode.  
4.5  
Music preview  
From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the 
׀
7 or 8
׀
 button to select the music preview  
function setting, and then press the MENU button to enter. During preview, it will play the initial 10 seconds of each music file and then skip to next. You can press  
the MENU button to exit.  
12  
 
4.6  
4.7  
About  
From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the 
׀
7 or 8
׀
 button to select about function, and then  
press the MENU button to enter. You can view the total memory and available memory.  
Folder function  
From mp3 or voice standby mode, you can press the MENU button to enter the main menu, and push the 
׀
7 or 8
׀
 button to select folder function, and then press  
the MENU button to enter. You can push and hold the MENU button to browse the file, and push the 
׀
7 or 8 
׀
 to select the desired one.  
In the folder mode, press MENU to enter the PLAY OR DELETE mode, press the 
׀
7or8
׀
 button to select. Press MENU to confirm .If you select the play, it will play  
the current song. If you select the delete, it will come into the delete mode. Repress the 
׀
7or8 
׀
 button to select the YES OR NO. Press MENU to confirm and  
press4; to exit.  
Note: You can not view the record folder and file under play music mode, which will only be available in play voice mode. )  
4.8  
Exit  
Return to MP3 mode. Note: From setting mode, you can press the 4; button to exit the setting mode quickly.  
13  
 
5.  
A-B Play Mode  
From MP3 or voice mode:  
1) Press the A-B /REC button to select starting point A.  
2) Press the A-B /REC button to select end point B, then it will repeat between A-B.  
3) Press the A-B /REC button again to cancel setting and resume playing MP3 or voice.  
6.  
HOLD function  
From MP3 and voice standby/ play/ pause/ record mode, you can push the HOLD switch opposite the arrow to lock all the other buttons with a Lock icon on the  
LCD accordingly. If you want to use other buttons, please push the HOLD switch to the opposite direction of arrow.  
7.  
8.  
Lyric sync:  
This player supports lyric sync function.  
Notice: The lyric file name shall be the same as music file, but with the suffix of *. LRC and saved in the same directory, and only the lyrics with time indication can  
USB mode  
Plug the Player into the USB port of a PC, The player display will indicate a USB connection.  
Additional icons will display when files are moving between the PC and the player  
For more information on how to update the software or format the removable disk, please refer to our website.  
14  
 
9.  
FAQ  
Problem  
Causes  
No display after pressing the power button  
No sound when playing music.  
No batteries installed, or batteries are very low  
1. Volume is too low or no music are on your player  
2. Battery low.  
3. MP3 or WMA file is corrupt.  
Cannot download music files after connecting  
to your PC  
1. HOLD is on so the disk is write protected  
2. The unit is not connected to PC properly.  
3. Storage directory is wrong  
Can not play MP3 files created by the user  
The MP3 files currently are compressed at a  
bitrate no supported by this player. Consult the  
Nextar website for mor info  
No response after pressing a button.  
HOLD switch is on so buttons are locked  
Can not open the disk or prompt I/O error after  
connecting PC.  
Caused by some improper operation. Turn off the  
unit, disconnect if from your PC and begin the  
process again.  
15  
 
Technical specifications  
Bit rate:  
8~320Kbps  
SNR:  
>85db  
Dynamic range:  
Condition of storage:  
Distortion:  
>80(1KHZ)  
Humidity<90%, normal temperature  
<0.05% (REFERENCE LEVEL0dBMP3)  
1 mW4mW -52dB/-62dBVOICE, REFERENCE FREQUENCY1KHZ)  
Display  
ID3 information display, blue backlight  
USB port:  
USB2.0 high speed  
Memory:  
128MB/256MB /512MB/1GB/2GB  
Net weight:  
Dimension:  
Working condition:  
Output:  
<30g  
83.5*29.5*24mm  
Humidity <85%,-10~40  
5mW*2  
Battery life:  
Record time:  
Operatin current:  
Standby current:  
<12h, low power waste  
0.8hour(320KBPS,128MB);30HOURS (8KBPS,128MB)  
60mA  
50mA  
16  
 

Miele Ice Maker k 21 ui User Manual
Milnor Clothes Dryer KURSPK0025 User Manual
MotoSAT Stereo System Reflector User Manual
MTD Trimmer CC4125 CC4175 User Manual
Napoleon Fireplaces Outdoor Fireplace N415 0232 User Manual
Newcon Optik Microscope Magnifier YUNNAT 2P 3 User Manual
Niles Audio Switch VCS 2D HP User Manual
Oricom Radio UHF080 User Manual
Panasonic Cooktop KY B64CA User Manual
Panasonic Home Theater System HT S790 User Manual